Windows 10 Pro reboots on its own without updates in queue after KB4340917

Helfe beim Thema Windows 10 Pro reboots on its own without updates in queue after KB4340917 in Windows 10 Support um eine Lösung zu finden; Hello, situation described in subject happened 2-3 times already since I installed the update on 4th. I believe, it didn't really happen before. What... Dieses Thema im Forum "Windows 10 Support" wurde erstellt von derkampfusbeke, 10. August 2018.

  1. derkampfusbeke
    derkampfusbeke Gast

    Windows 10 Pro reboots on its own without updates in queue after KB4340917


    Hello,

    situation described in subject happened 2-3 times already since I installed the update on 4th. I believe, it didn't really happen before. What did happen before on 2 occasions was inability to restore from suspend. Then the system also rebooted after a short countdown on a BSOD.
    I'm not sure where to look, I found a CLI command to print the reason for the latest reboot before, but I can't find it anymore.
    I took a look into the "Event Viewer->Windows Logs->System" and couldn't find anything on the reboot between the time I went to bed and the time I woke up. However, there was a high noon entry "Information"-"Event Log", ID 6013. "The system uptime is 112158 seconds." It was definitely under 24 hours if the system indeed rebooted. It could have signed out, I'm not sure.

    What could be causing the problem and what can I do?

    P.S. Oops, never mind, I got it wrong, the system rebooted after high noon, after I left my home the first time today.
    "The previous system shutdown at 1:22:53 PM on ‎8/‎10/‎2018 was unexpected."

    There are a lot of log entries and I'm not sure which one could be useful or how I could export and upload the log file.
    One of my disks is failing since a long time, most log entries pertain to it. It`s not a system disk and I long gave up on it. I don't think, that it could be causing this problem. I don't want to disconnect it, as a lot of work would be involved.

    Regards


    P.P.S. Sorry, I'm guessing, this is winding up in English on a German forum. Bug reports:

    In Waterfox 56.2.2 (64-bit) I'm getting the error

    Weiterlesen...
     
    #1 derkampfusbeke, 10. August 2018
  2. Hobi Expert
    Willkommen,

    Gehe die folgenden Anleitungen durch:
  3. derkampfusbeke
    derkampfusbeke Gast

    I just received some error messages about exception breakpoints in Pidgin and Waterfox. Had to reboot manually, not sure if similar problems caused the forced reboots.

    I never had similar error messages before.
     
    #2 derkampfusbeke, 12. August 2018
  4. hansjorg71
    hansjorg71 Gast
    #3 hansjorg71, 12. August 2018
  5. derkampfusbeke
    derkampfusbeke Gast
    Why did the original message end up incomplete?

    ---

    In Waterfox 56.2.2 (64-bit) I'm getting the error

    {"ErrorMessage":null,"IsError":false,"Result":{"message":"Message must be 6 to 60000 characters long."},"Success":false,"CorrelationVector":null,"DependencyCorrelationVector":null}

    Up until regards those were 1415 charactrers).

    Edge cant enter answers.microsoft.com, when I enter it into the address field. I had to search for it with Bing. Then in switches into German and deleting "de-de" from the address field doesn't help. System language is English. I do speak German, but English
    community is bigger and I don't want to rewrite my message (and I need help for what I have to do in the GUI in English, anyway).

    Please forward to the English forum.

    P.P.P.S. Why are there HTML tags creeping in into the message in Edge???

    ---

    Today the PC didn't recover from suspend, black screen for a long time ("no signal") and then BIOS/Logon screen. This also happened before the latest update a couple of times, this I forgot to mention
     
    #4 derkampfusbeke, 13. August 2018
  6. skorpion68
    skorpion68 Gast
    Hallo Morten,
    dein Problem könnte im Zusammenhang mit dem hier "Zugriff verweigert"-Fehler und mit COM-Aktivierung nicht nach der Installation von Juli 2018 Sicherheit und Qualität Rollup Updates für.NET Framework stehen da Microsoft dieses Problem auch hier 24. Juli 2018 – KB4340917 (Betriebssystembuild 17134.191) erneut dokumentiert.

    Zu dieser Aussage möchte ich dir dies hier Windows 10-Versionsinformationen noch zum lesen geben, gehe aber davon aus, dass du dich bei der Versionsangabe nur verschrieben hast.
     
    #5 skorpion68, 13. August 2018
Thema:

Windows 10 Pro reboots on its own without updates in queue after KB4340917

Die Seite wird geladen...

Windows 10 Pro reboots on its own without updates in queue after KB4340917 - Ähnliche Themen - reboots its own

Forum Datum

Bluescreen auf Windows 10 pro /Reboot

Bluescreen auf Windows 10 pro /Reboot: Der Computer wurde nach einem schwerwiegenden Fehler neu gestartet. Der Fehlercode war: 0x0000001e 0xffffffffc0000005, 0xfffff8043e90e507, 0xffffe180240e5258, 0xfffff80443482920. Ein volles Abbild wurde gespeichert in: C:\WINDOWS\MEMORY.DMP. Berichts-ID: 2ddb9d7c-4b19-40d1-954f-510971b46555.-...

Windows 10 Support 27. Juni 2021

PC reboots every 11min after bluescreen

PC reboots every 11min after bluescreen: After a few months of being idle due to a covid lockdown, 2 of our Dell PCs bought in Dec 2020 suddenly keep rebooting repeatedly after 10min and 53sec. They die with a BSOD, this is the log from Event Viewer: The computer has rebooted from a bugcheck. The bugcheck was: 0xdead000b...

Windows 10 Support 18. April 2021

Touchscren Problem on Surface Pro 3 after update to Windows 1903

Touchscren Problem on Surface Pro 3 after update to Windows 1903: The touch screen on my Surface Pro 3 i5 responds only in some areas to finger touch after I updated to build 1903. However the pen works on the whole screen! Firmware and driver software is up-to-date. Has anybody encountered a similar problem and maybe solved this issue? Weiterlesen...

Surface 5. September 2019

KB4340917 Nummernblock Tastatur geht nicht

KB4340917 Nummernblock Tastatur geht nicht: Hallo Zusammen, nachdem ich das Windows 10 Update KB4090913 installiert habe, geht der Ziffernblock der Tastatur nicht mehr, oder nur ab und zu. Wie kann ich diesen Fehler beheben? Gibt es noch ein Reparatur Update? Vielen Dank für euer Hilfe

Windows 10 Allgemeines 8. August 2018

heruntergeladene Updates KB4340917 und KB4338819 werden nicht installiert

heruntergeladene Updates KB4340917 und KB4338819 werden nicht installiert: [ATTACH] Mehrmals habe ich "sfc /scannow" + "wu170509.diagcab" durchgeführt. [ATTACH] Weiterlesen...

Windows 10 Support 5. August 2018

Probleme mit Windows Update (KB4340917)

Probleme mit Windows Update (KB4340917): Hallo ich habe eine Win 10 Maschine die das Update KB4340917 nicht installieren möchte. Installationsfehler: Die Installation des folgenden Updates ist mit Fehler 0x80073712 fehlgeschlagen: 2018-07 Kumulatives Update für Windows 10 Version 1803 für x64-basierte Systeme (KB4340917) Weiterhin...

Windows 10 Support 28. Juli 2018

Windows 10 - Registered Owner

Windows 10 - Registered Owner: Nach einer Neuinstallation meines Windows 10 Pro 64 - Bit Systems (mit Anniversary Update) fehlen in der Registry unter [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion] die Einträge "Registered Owner" und "Registered Organization". Vermutlich aufgrund dessen kann ich bestimmte...

Windows 10 Support 25. August 2016

Permanenter Reboot nach Windows 10 Update

Permanenter Reboot nach Windows 10 Update: Hallo, nach einem Windows 10 Update startet der Rechner nicht mehr. Er zeigt kurz das Windows 10-Logo um dann gleich wieder neu zu starten. Das Update wurde abgebrochen nachdem der Rechner für über eine Stunde bei 78% verharrte und keine Reaktion zeigte. Wie ist die weitere Vorgehensweise?...

Windows 10 Support 14. März 2016

Windows 10 Pro reboots on its own without updates in queue after KB4340917 [gelöst]

  1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies.
    Auf dieser Website werden Cookies für die Zugriffsanalyse und Anzeigenmessung verwendet.
    Information ausblenden