Display connected via USB-C can't be activated

Helfe beim Thema Display connected via USB-C can't be activated in Surface um eine Lösung zu finden; When I try to connect a USB-C display Win 10 recognizes the display but shows Display isn't active under advanced settings. In all modes Duplicate,... Dieses Thema im Forum "Surface" wurde erstellt von Tammosinho, 14. Januar 2021.

  1. Tammosinho
    Tammosinho Gast

    Display connected via USB-C can't be activated


    When I try to connect a USB-C display Win 10 recognizes the display but shows Display isn't active under advanced settings.


    In all modes Duplicate, Extent and Show only on 2 Windows jumps back tp mode "Show only on 1".


    The display works without problems with a different HP via USB-C

    Weiterlesen...
     
    #1 Tammosinho, 14. Januar 2021
  2. Hobi Expert
    Willkommen,

    Diese Schritte solltest du nacheinander ausführen:
Thema:

Display connected via USB-C can't be activated

Die Seite wird geladen...

Display connected via USB-C can't be activated - Ähnliche Themen - Display connected via

Forum Datum

Picture on Desktop can't be deleted

Picture on Desktop can't be deleted: So I dragged an Alamy jpg on my desktop and now I can't delete it.Dragging it into the trash can or even other folders doesnt work. I've already tried using cmd to do: dell\\?\ and then the file's directory.The problem is the that the file's directory is not C\...It is \\?\C\... so i think it...

Windows 10 Support 3. Januar 2024

Monitore werden via USB-C zu DP Kabel nicht erkannt

Monitore werden via USB-C zu DP Kabel nicht erkannt: Setup:- Surface Book 3 mit i7-1065G7 und GTX 1650- MS Windows 11 Home, 10.0.22621- Surface Dock 2 1917- DELOCK USB-C zu DP Kabel + ein No Name probiert- Montitore Samsung LU32R591CWRXENMit oder ohne Dock werden die Bildschirme weder erkannt noch wird was angezeigt.Via Dell Dock und HDMI werden...

Surface 5. Januar 2023

Surface USB-C/Ethernet- und USB-C/USB-Adapter

Surface USB-C/Ethernet- und USB-C/USB-Adapter: Ist es normal, dass der Adapter relativ warm wird, wenn er angesteckt ist? Weiterlesen...

Surface 3. Dezember 2020

Monitor, der via USB-C-Hub verbunden ist, erzeugt periodischen Systemsound

Monitor, der via USB-C-Hub verbunden ist, erzeugt periodischen Systemsound: Produkt: HP Envy X360 15-Ed0779ng Betriebssystem: Microsoft Windows 10 64-Bit Hi, ich habe das folgende Problem mit meinem neuen Notebook: Ein Monitor ist mit dem HDMI-Port meines USB-C-Hubs verbunden. Dieser USB-C-Hub ist mit dem USB-C-Port des Notebooks verbunden. Im Normalbetrieb...

Windows 10 Support 31. August 2020

My windows 10 is not activated anymore and can't be re-activated

My windows 10 is not activated anymore and can't be re-activated: Hey, I have a strange problem. My updating is acting up and my windows 10 pro is not activated anymore. I've tried a lot so far, which I will list below. But first my error codes I get: for my Updates I get: 0x80240fff and perhaps related to that is my deactivated Windows key. It says I...

Windows 10 Support 9. Dezember 2019

.NET Framework can not be activated

.NET Framework can not be activated: Good day, To use my editing program, I need .NET Framework 3.5. I wanted to activate this under Windows features. After the file was downloaded, I got the following error message: The requested changes could not be completed. The system can not find the stated file. Error code: 0x80070002...

Windows 10 Support 17. Februar 2018

SmartScreen can't be reached now

SmartScreen can't be reached now: Beim Versuch auf Insider Preview 14986 zu updaten kommt der im Betreff beschriebene Fehler. Meine Internetverbindung funktioniert tadellos. Gibt es einen Workaround, um das zu "flicken"? Weiterlesen...

Windows 10 Support 20. Dezember 2016

A required device is not connected or can't be accessed. Error code: 0x000000f

A required device is not connected or can't be accessed. Error code: 0x000000f: Hi, nachdem ich mein kostenloses update von Windows 7 auf 10 durchgeführt habe, ist mein PC abgestürzt. Ich bin aufgefordert worden nun das update durchzuführen und es schien auch erst alles normal zu laufen. Habe den PC laufen lassen und habe dann später diesen wieder angeschaltet....

Windows 10 Support 16. August 2015

Display connected via USB-C can't be activated [gelöst]

  1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies.
    Auf dieser Website werden Cookies für die Zugriffsanalyse und Anzeigenmessung verwendet.
    Information ausblenden